#

Key takeaways

• Muse Gadgets lets developers connect their own hardware to the Muse assistant.

• Meta published device SDKs and firmware as open source under Apache 2.0.

• The project supports ESP32 boards and Linux devices such as Raspberry Pi.

• Example builds include displays, buttons, sensors, actuators, and audio components.

• Muse Home Link is a separate Meta device with limited availability details in the source.

What Muse Gadgets is

Meta introduced Muse Gadgets on October 2, 2026, according to the dated report and the live project page. The project is a developer hardware effort. It lets developers connect their own hardware to the Muse assistant.

The official page describes two main paths. Developers can program an off-the-shelf ESP32 board. They can also configure a Raspberry Pi or another Linux computer with device SDKs.

What developers can connect

The source says developers can connect displays, buttons, sensors, actuators, audio components, and other hardware. The project page also gives examples. These include a display for briefings, a button-operated device, and a Home Assistant connection.

The source does not say that every example is available everywhere. It also does not say that every example is supported in every setup. So the safest reading is that these are examples, not universal promises.

SDKs, firmware, and licensing

Meta published device SDKs and firmware as open source under the Apache 2.0 license. The source says the software is provided as-is and without warranty. That matters for teams that want to build on top of it.

The project requires an SDK token for building devices. The source does not explain how to obtain that token. It also does not describe any broader access rules beyond the project page details.

Supported hardware paths

The source names an ESP32 SDK for devices with screens, sound, and sensors. It also names a Linux SDK for a Raspberry Pi or other Linux computer. The Linux SDK can support custom commands.

This split suggests two practical build paths. One path is for smaller embedded devices. The other is for Linux-based hardware that can handle more flexible logic.

Muse Home Link

Meta also shows its own Muse Home Link. The source describes it as a USB-C-powered device. It is meant for reaching compatible equipment on a home network or devices with a local HTTP API.

The official page says Home Link is free for active Muse subscribers in the United States only. It is limited to one per subscriber and first come first served. The source also says October shipping is planned.

Operational considerations

The source gives a few clear constraints. The software is open source, but it comes with no warranty. The project also depends on an SDK token. And Home Link has a narrow availability note in the source.

That means builders should read the project page carefully before planning a device. They should treat the examples as starting points. They should also separate the open source SDKs from the separate Home Link offer.

Morocco relevance

The source reports no Morocco-specific availability or program details. For readers elsewhere, the global lesson is simple: check licensing, token requirements, and device support before building.

Bottom line

Muse Gadgets is a developer-facing hardware project around Muse. It combines open source SDKs, supported hardware paths, and example integrations. The source also makes clear that availability and support vary by component.

For builders, the main value is flexibility. For readers, the main caution is scope. The project page gives useful starting points, but it does not promise universal access or universal support.